iMax B

MAXIMUM EFFICIENCY, MAXIMUM SAFETY.

Speed and safety at the service of reliable and effective class B sterilization, in full compliance with the EN 13060 standard. IMAX is able to guarantee high level performance, thanks to extensive research and development on materials and technologies – such as the controlled heating system and powerful vacuum pump, designed to sterilize all materials and instruments, even the most delicate. The autoclave is equipped with an 18-litre nickel-plated copper chamber, with a thermal conductivity 10 times higher than that of stainless-steel chambers, and designed to optimize loads, thanks to the 4 special trays and rounded rack. The PC connection allows you to efficiently control the entire process and to track and preserve the data from each cycle.

View Catalogue

Technical Data

OVERALL DIMENSIONS	447 x 438 x 625 mm (L x H x P)
CHAMBER DIMENSIONS	Ø 240 – 384 mm (P)
CHAMBER SIZE	17,5 L
WEIGHT (empty)	45 Kg
POWER SUPPLY VOLTAGE	230 V 50/60 Hz
POWER CONSUMPTION	900 W – 1920 W
OPERATING TEMPERATURE	+10 -+ 40° C
ALTITUDE	between 0 and 2000 metres above sea level
OPERATING RANGE	Indoor use Relative humidity 85% Maximum line-voltage deviation ±10% Installation category II Pollution level 2
USABLE SPACE	180 x 282 x 160 mm LxPxH
WATER CONSUMPTION VOLUME	0,6 litres
TANK CAPACITY (clean water and used water)	4 litres each
AUTO SWITCH-OFF	After 30’ of stand by at the end of cycle

Sterilization Cycle

Cycle	Temperature	Sterilization	Drying phase	Vacuum	Cycle type	Max load
B134	134° C	5′	10′	3	B	4 kg solid – 1,5 kg porous
B121	121° C	20′	11′	3	B	4 kg solid – 1,5 kg porous
S134	134° C	3′	5′	2	S	4 kg solid
CUSTOM	105-135° C	3′	5′-14′	2-3-4		4 kg solid – 1,5 kg porous
HELIX TEST	134° C	3’30”	10′	3	TEST
B&D TEST	134° C	3’30”	10′	3	TEST
VACUUM TEST	<35° C			3